Name: JBL PROAQUATEST CO2-pH Permanent REFILL
Brand: JBL
SKU: 2413900
Price: 11.2 EUR
Availability: InStock
Rating: 5 (6 reviews)

This permanent indication test uses colouration to show the aquarist the pH value and the CO2 content of the aquarium water at any time.
You can read off whether the pH value is within the optimal range and whether the plants have sufficient CO2 as their main nutrient available during the day 24/7.

How exactly does the test work?
The CO2 dissolved in the aquarium water diffuses in the container of the permanent test, passes into the air column containing the indicator liquid and then dissolves in the liquid. This creates a pH value, which results in the discolouration of the indicator liquid. The colour displayed corresponds to a certain pH-value and, depending on the carbonate hardness of the water, you can read off whether the resulting CO2 content is too high, too low, or optimal.
If another pH-lowering or increasing substance (e.g. pH-Minus) apart from CO2 is added to the aquarium water, it cannot diffuse through the air column in the permanent test and thus does NOT affect the indicator liquid. In this case the pH value displayed would not be correct. It only shows correct values, when there are NO other pH-influencing substances in the water besides CO2.

How long does it take until the test displays correctly?
Due to its design the test is somewhat sluggish, because the CO2 gas needs to first "migrate" through the air column in the test vessel, then into the indicator liquid and can only then be displayed. It can therefore take up to one hour until the test shows the current CO2 content of the aquarium water for the first time.

Recommended CO2 content:
Freshwater aquarium (community aquarium): 15-35 mg/l;
Lake Malawi-Tanganyika aquarium: 4-10 mg/l;
Plant aquarium with few fish (aquascaping): 20-35 mg/l

Where can I find the record sheets for the documentation of my water analysis?

Have you lost your record sheets, used them all up, or need them in another language?
In the appendix of this FAQ you will find PDF files for printing them out in German, English and French.

9789500 V05 PROAQUATEST Wasseranlayse PREVIEW.pdf

Is the fluid of the JBL CO2/pH Permanent Test harmful to the tank inhabitants if some of it gets into the water?

The fluid itself with the colour indicator is not harmful in any way with the high dilution in the tank and, in addition, it decomposes very quickly.

JBL CO2/pH Permanent: Does ozone affect or distort measurements in the CO2 permanent test?

Depending of the dosage it is quite possible that the ozone attacks the indicator of the CO2 permanent test and “oxidizes”. A reasonable continuous measurement of CO2 is then not possible with this method.

Despite CO2 fertilisation the indicator remains blue

No CO2 is generated when fertilising with so-called liquid carbon. Therefore the test is not able to indicate CO2, which means that the indicator always remains blue! If you add CO2 in gas form you need to increase the amount or the duration.

What can I do when the measured value of a water test falls outside the scale?

If one of your measurements reaches the end of the colour chart scale you can multiply the scale by diluting later tests with distilled water (e.g. JBL Dest).

Here’s how to do it: dilute the sample with distilled water and carry out the test once more.

This works in detail as follows:
GH test: Instead of 5 ml use 10 ml aquarium water. Now 1 drop is equivalent to 0.5 dGH.
KH test: Instead of 5 ml use 10 ml aquarium water. Now 1 drop is equivalent to 0.5 dGH.

Note: when using 10 ml sample water the colour development is weaker with the first drops than with 5 ml sample water. Put the measuring container on a white underlay for a better readability.

NH4/NH3 ammonium/ammonia, NO2 nitrite, Fe iron and Cu copper:
2.5 ml sample + 2.5 ml dist. water: result times 2
1 ml sample + 4 ml dist. water: result times 5
0.5 ml sample + 4.5 ml dist. water: result times 10

NO3 nitrate, SiO2 silicate, PO4 phosphate sensitive and Mg magnesium freshwater:
5 ml sample + 5 ml dist. water: result x 2
2 ml sample + 8 ml dist. water: result x 5
1 ml sample + 9 ml dist. water: result x 10

PO4 phosphate koi high range:
2.5 ml sample + 2.5 ml dist. water: result x 2
1 ml sample + 4 ml dist. water: result x 5

K potassium:
7.5 ml sample + 7.5 ml dist. water: result x 2
3 ml sample + 12 ml dist. water: result x 5
1.5 ml sample + 13.5 ml dist. water: result x 10

K potassium in marine water:
1. Fill 10 ml of sample water with distilled water to 300 ml.
2. Follow the instructions for fresh water.
3. Multiply the test result by a factor of 30.

CO2 direct, Ca calcium and Mg+Ca magnesium+calcium: not required.

Show more FAQs ...

The reagent in the JBL CO2/pH Permanent Test decolourises after a few days.

It is very likely that a bacterial biofilm has formed in the container. Please place the reaction vessel in hot water (> 40 °C) for approx. 10 minutes. In order to do so, it must be taken apart and then put together again afterwards. Please do not use boiling water, as this may cause damage to the plastic.

Is the drop count of 35 correct for the JBL CO2/pH Permanent test set?

Yes, the drop count is correct. This is the reason why two bottles of indicator solution are included with the test set. With the new JBL CO2/pH Permanent test set the indicator solution is no longer prepared in the aquarium water. The indicator is adjusted to a fixed carbonate hardness so that incorrect measurements (as when humic acids enter the aquarium water) can no longer occur.

Aren’t these two statements about the JBL CO2/pH Permanent Test contradictory? The special indicator shows the CO2 level independently from substances in the water, such as humic acids or nitrate, which influence the pH value. The pH permanent test only works when no substances, such as pH-Minus or peat, which influence the pH values, are added.

No, the two statements do not contradict each other.

The indicator reacts to the pH value of the test liquid. The indicator in the JBL CO2/pH-Permanent test only changes colour because of the carbon dioxide which has diffused from the water into the test liquid.

Humic acids or other acids have a pH-reducing effect. As a result the real pH value in the aquarium water can be lower than that shown in the indicator, which is only influenced by the diffused carbon dioxide inside the water.

Do my water tests still work although they have been open for nine months?

Basically a sealed test keeps longer than an open one. How much the shelf life is reduced depends crucially on the handling and the storage conditions of the reagents. It may happen that a reagent in a test that has been open for 9 months doesn’t indicate correctly any more. However, additional information is needed to answer this question properly.

JBL TV #53 How do you carry out water tests correctly and what are the most common mistakes?

Water tests for aquarium water can be very important, especially when there are problems.

Animal species:	Armored catfish, Arowana, Axolotl, Barbels, Bettas, Bichirs/reedfish, Blowfish, Catfish, Cichlids (South America), Clawed frogs, Clawed shrimps, Crayfish, Crustaceans, Danions, Discus, Dwarf crayfish, Dwarf shrimps, Flowerhorn, Gill maggots, Goldfish, Gouramis, Guppy, Juvenile fish, Killifish, Livebearers, Loaches, Mussels, Newts, Panchaxes, Rainbowfish, Snails, Spiny eels, Tetra, Veiltails, blood parrot cichlids, freshwater butterflyfish
Animal size:	For all animal sizes
Animal age group:	All aquarium fish
Material:	Reagent(s) in plastic bottle(s) and/or glass bottle(s) + plastic and/or glass accessories. REFILL: reagent(s) without accessories.
Colour:	white / transparent / black
Dosage:	See instructions

Mercury:	No
Dimmable:	No

Mercury:	No
Dimmable:	No

Products & Shop

JBL PROAQUATEST CO2-pH Permanent Permanent test to determine the acid/carbon dioxide content in freshwater aquariums

You may also be interested in

PROAQUATEST pH 3.10-10.0

PROAQUATEST pH 6.0-7.6

PROAQUATEST pH 7.4-9.0

PROAQUATEST GH General hardness

PROAQUATEST KH Carbonate hardness

PROAQUATEST O2 Oxygen

PROAQUATEST Cu Copper

PROAQUATEST Fe Iron

PROAQUATEST SiO2 Silicate

PROAQUATEST NH4 Ammonium

PROAQUATEST NO2 Nitrite

PROAQUATEST NO3 Nitrate

PROAQUATEST PO4 Phosphate Sensitive

PROAQUATEST K Potassium

PROAQUATEST Ca Calcium

PROAQUATEST Mg-Ca Magnesium-Calcium

PROAQUATEST CO2 Direct

PROAQUATEST Mg Magnesium Fresh water

JBL PROAQUATEST CO2-pH Permanent

Properties

Electronic label / illuminant

JBL PROAQUATEST CO2-pH Permanent REFILL

Properties

Electronic label / illuminant

JBL TV #53 How do you carry out water tests correctly and what are the most common mistakes?

JBL TV #52 What kind of water do my aquarium fish need? What water values are ideal?

JBL PROAQUATEST - simple yet laboratory standard - Part II

JBL PROAQUATEST - simple yet laboratory standard - Part I

Have you got the right CO2 and fertiliser content in your aquarium?

JBL TV #45: Optimum water values in the freshwater aquarium - 15 parameters explained simply

JBL TV #38: Important for aquarists: pH, KH and CO2 - The correlation between them.

JBL water tests - how to test correctly and reap the benefits

JBL TV #27: Testing aquarium water - this is how it works

JBL TV #1: Why do plants need a CO2 system in the aquarium?

Time For A Change - Pros And Cons

How often do you need to test your pond or aquarium water?

Measuring the CO2 Content With Drop Test (VIDEO)

Outline: Fertilisation in the Aquarium

Care products - The best solutions for your aquarium

From ProFlora CO2 system owner to tester, free of charge

Keeping an eye on the most important water values

Why plants grow better with CO2

Water values for water plants in detail

The story of liquid CO2 fertilisation – The Reliability

The story of liquid CO2 fertilisation – The CO2 Content

The story of liquid CO2 fertilisation – The Effect

The story of liquid CO2 fertilisation – The Substance

The story of liquid CO2 fertilisation

Why is carbon dioxide (CO2) the most important plant nutrient in the aquarium?

There’s more to fertilization than you’d think Part 2

Fertilization is not just fertilization Part 1

Oxygen Explosion in the Aquarium – The Right Fertilisation

JBL has the largest range of water tests worldwide!

JBL Water Tests Now Even Better

Reducing problematic water values

Diseases

Deficiency symptoms

Algae control

Testing water

Fish breeding in aquariums

Water tests

Water values

Plants

CO2 plant fertilisation

Biotope (habitat) aquarium types

Aquascaping aquarium type JBL Dreamscape®

Jungle aquarium type JBL Rio Pantanal®

Goldfish aquarium type JBL Goldfish Paradise®

Rocky reef aquarium type JBL Malawi Rocks®

Plant species

Fertilising

CO2

Daily care

Plant care

Plant growth

Instructions

JBL ProAquaTest CO2-pH Permanent

JBL PROAQUATEST CO2-pH Permanent
Permanent test to determine the acid/carbon dioxide content in freshwater aquariums