Mercury: | No |
Dimmable: | No |
Please check the following: remove the pump head from the filter casing, remove the impeller cover and check whether the impeller is stuck. Remove the impeller and clean it and the impeller shaft. Afterwards reinstall the parts. Then shortly insert the plug into the socket. The impeller will run again and the magnetic force should be noticeable.
The magnets have been tested extensively and hold securely in their corner in tanks with a glass thickness of up to 12 mm. It is often advisable to use 3 magnets if the glass is more than 10 mm thick so that they are secure enough and won’t fall off in case of a small jolt.
Unfortunately, we must assume that the value displayed on your ammeter is incorrect. There are numerous ammeters which do not include the blank value (cosinus phi) in measurements correctly.
You can only determine the actual output of a filter with a corrected device or by multiplying the voltage times the current (amperes) that is measured:
V * A * cos Phi = W.
However, it is advisable to gauge the flow rate by litres for operation in an aquarium. The external filters have the following flow rates in a cleaned condition and with a hose length of 1.5 m:
CristalProfi e700: 350-400 l/h
CristalProfi e900: 380-450 l/h
CristalProfi e1500: 800-900 l/h
Green water means floating algae, which grow when they have no competition from other plants and, even more, when the excrement of the fish creates excessive nutrient pollution in the water. The filter will not be able to do much about this. Ultimately, there are only two options:
1. Carry out significantly more water changes in order to remove the nutrients caused by fish excrement.
2. A JBL PROCRISTAL UV-C Compact plus kills off the floating algae.
A temporary measure is to switch off the light for 2-3 days in order to stop photosynthesis in the algae.
According to your description, a small bubble appears periodically in the impeller housing of the CristalProfi and is then transported out of the filter.
If air enters the filter system, this may be an indication that a seal is no longer tight or that connecting pieces don’t close tightly, for example. Since there is a constant slight low pressure during operation, this doesn’t necessarily become noticeable. In the event that there is a leak of this kind, you can test by switching off the filter temporarily, in which case a small amount of water would escape at the leaky spot. Caution: This test should only be carried out with careful monitoring.
Another possibility: The filter material may be very heavily soiled, which may result in the formation of fermentation gas which is pressed out of the filter periodically.
The third possibility: Adding carbon dioxide through the suction nozzle, which we discourage.
The filter (CristalProfi) starts up again on its own after a power shut off, but only if there is water in the filter circuit.
Show another review in another languages
Habe ich mir vor ca 2 Wochen gekauft und bin mehr als zufrieden!
The JBL Homepage also uses several types of cookies to provide you with full functionality and many services: We require technical and functional cookies to ensure that everything works when you visit this website. We also use cookies for marketing purposes. This ensures that we recognise you when you visit our extensive site again, that we can measure the success of our campaigns and that the personalisation cookies allow us to address you individually and directly, adapted to your needs - even outside our website. You can determine at any time - even at a later date - which cookies you allow and which you do not allow (more on this under "Change settings").
The JBL website uses several types of cookies to provide you with full functionality and many services: Technical and functional cookies are absolutely necessary so that everything works when you visit this website. In addition, we use cookies for marketing purposes. You can determine at any time - even at a later date - which cookies you allow and which you do not (more on this under "Change settings").
Our data protection declaration tells you how we process personal data and what purposes we use the data processing for. tells you how we process personal data and what purposes we use the data processing for. Please confirm the use of all cookies by clicking "Accept" - and you're on your way.
Are you over 16 years old? Then confirm the use of all cookies with "Noticed" and you are ready to go.