Themeworld

The right filter material

Which filter material for which purpose?

The material responsible for clean water in your filter is the so-called filter media. Because of its various functions, there is a wide range of media to choose from. JBL can provide most filter media in two forms: as a “loose” material, which you can individually add to each filter, or as a complete pre-assembled filter material, which fits perfectly into the filter basket of your JBL Cristal Profi external filter or as a filter cartridge into your JBL ProCristal internal filter.

Where do the various filter media belong?

The rule of thumb is that water needs to be filtered in a sequence from coarse to fine. A fine filter material would quickly clog and reduce the water flow if used in the first stage. That’s why we pre-filter first, then follow this with the biological filtration. Ideally this should be followed with an additional fine mechanical filter media. Problem-solving filter material, such as phosphate removers are intended to replace the last part of the biological filter medium (due to lack of space) and need to be placed before the final fine mechanical filter media.

Mechanical water cleaning

Waste which is sucked directly from the aquarium and reaches the filter would quickly clog the filter material. Therefore there is a relatively coarse filter material which leads to a pre-filter. This includes coarse filter foam ( JBL Coarse Filter Foam ), filter sponges, which are cut to size for the pre-filter in the respective types of filter ( JBL CRISTALPROFI COMBIBLOC II ) and also coarse filter ceramics ( JBL Cermec ).

All the filter media mentioned above can be cleaned through vigorous rinsing with tap water and used again.

Pollutant-degrading bacteria settle in the filter and transform every mechanical filter material into biological filter material in the course of time. Cleaning largely disrupts this “biology” and it has to be restarted with the help of new bacteria ( JBL FilterStart , JBL FilterBoost ).

In the past it was recommended you rinse filter material in an aquarium water sample. New findings have shown that not only beneficial bacteria settle in the filter, but unfortunately also pathogenic (disease causing) germs reproduce there. For this reason efforts should be made to thoroughly clean the filter material and to “destroy” the bacteria population too. Through the subsequent inoculation with filter bacteria ( JBL FilterStart ) ONLY beneficial, pollutant-degrading bacteria are added. That way the biological filtering restarts immediately and pathogenic germs have less chance to settle.

Biological filtration

The biological filter material provides a large area for the colonization of bacteria, which decompose harmful substances. For this purpose fine filter foam ( JBL Fine Filter Foam ) or ready-made pre-cut material ( JBL CRISTALPROFI UNIBLOC e ) can be supplied. Materials made of sintered glass, which show a fine pore structure where the bacteria can settle and break down pollutants are far more effective in that respect. For larger filters with volumes from approx. 3 litres JBL provides sintered bio-glass rings ( JBL Sintomec ) and for smaller filters sintered bio-glass balls ( JBL Micromec ). A complete colonisation of the filter by bacteria depends, of course, on its size, taking about 2 weeks in freshwater and about 2 months in marine water.

Biological filter media need to be rinsed briefly, but not intensively cleaned. Otherwise the bacteria are killed off completely and a resettlement can take quite a long while.

Troubleshooting filter material

Sometimes substances accumulate in the water, and this can cause problems. Nitrates (NO3) and phosphates (PO4) are, amongst other things, algae nutrients. Silicates (SiO2) lead to unsightly diatoms. You can measure the concentration of these substances using water tests and reduce or remove them completely with the help of special filter media. Under Water values we will show you what to do.

Troubleshooter filter media can’t be cleaned but need to be replaced when depleted. An exception is JBL NitratEX , which can be replenished with a saline solution.

After the use of medications it is important to remove these from the aquarium water by carrying out a partial water change and inserting activated carbon in the filter. Activated carbon can also help reverse water discolouration. Here we recommend JBL Carbomec activ for aquarium water with pH values up to 7.5 and JBL Carbomec ultra for pH values above 7.5 as in marine water or in Lake Tangayika aquariums.

Activated carbon can’t be cleaned and needs to be removed or replaced after completing the application.

JBL Carbomec activ
High performance activated carbon for freshwater aquariums
  • Removal of residual medications, discolouration of the water and high molecular organic impurities: high performance activated carbon for the use in aquarium filters
  • To use: put the carbon in universal filter bag, rinse repeatedly under warm water, reflush cold. Embed in the filter.
  • Adjustment to pH 7: suitable for use in the pH range from 6.5 to 7.5, can be used immediately
  • No release of algae-promoting phosphate to the water
  • Package delivery: 1 packet of high performance activated carbon. Incl. net bag, clip
from 15,45 €
More View product
JBL Carbomec ultra
Highly activated pelletized carbon for marine aquarium filters
  • Removal of discolouration and high molecular organic impurities: pellet-shaped activated carbon for the use in aquarium filters
  • To use: put the carbon in universal filter bag, rinse repeatedly under warm water, reflush cold. Embed in the filter.
  • Adjustment to pH 8: suited for the use in the pH range from 7.5 to 8.5, can be used immediately
  • No release of bound substances, 100% free of phosphate, pH-neutral and conductance neutral, suitable for Malawi and Tanganyika aquariums
  • Package contents: 1 packet pelletized carbon. Incl. net bag, clip
from 19,79 €
More View product

To add natural substances to your water, to prevent algae and to very slightly acidify the water, you can use peat pellets as filter material: JBL Tormec activ

Post-filtration

After the water has run through your filter it reaches a fine filter material. For this purpose fine filter foam, filter floss or filter fleece are suitable. The finer the filter material, the more often it needs to be cleaned and replaced!

Filter floss

Filter floss is a perfect filter material to remove dirt from the water. But depending on the degree of soiling, it can become clogged quite quickly and reduces the water flow of your filter. When you briefly lock your filter to open it, you can easily see with the naked eye, how heavily soiled your filter floss is. Filter floss is so fine that it can’t be rinsed but needs to be replaced during each filter cleaning.

JBL Symec micro
Microfibre fleece for aquarium filters to remove all types of water cloudiness
  • Fast removal of finest types of cloudiness in freshwater and marine aquariums: quality microfibre fleece for the use in aquarium filters
  • Easy to use: individual cut of fleece mat (suitable for all filters). Inlay as last filter stage. Remove material after 12, latest after 24 hours (added fleece indicates how much cloudiness has been removed)
  • Crystal-clear water: filters off floating algae, finest types of clouding and all particles of 1/1000 mm upwards, including white spot disease swarmers
  • No release of pollutants - water-neutral synthetic fibre
  • Contents: 1 microfibre fleece mat 25x74 for aquarium filters
from 10,47 €
More View product
JBL Symec Filter floss
Filter wool for aquarium filters to remove all types of water cloudiness
  • Fast removal of all kinds of cloudiness in freshwater and marine aquariums: quality filter wool for aquarium filters
  • Easy to use: select quantity of wool (suitable for all filters) as required. Insert as last filter stage. Removal required when water flow rate decreases.
  • Crystal-clear water: filters off all types of cloudiness and particles. Although rinsing is possible we recommend exchanging it instead
  • No release of pollutants and fibres – fully synthetic, residue-free filter wool
  • Contents: 1 pack filter wool for aquarium filters
from 3,01 €
More View product
JBL Symec XL
Coarse filter wool for aquarium filters to remove of all types of water cloudiness
  • Fast removal of all types of cloudiness in freshwater and marine aquariums: coarse filter wool for aquarium filters
  • Easy to use: select quantity of wool (suitable for all filters) as required. Insert as last filter stage. Removal required when water flow rate decreases.
  • Crystal-clear water: filters off all types of cloudiness and particles. Although rinsing is possible we recommend exchanging it instead
  • No release of pollutants and fibres – fully synthetic, residue-free filter wool
  • Contents: 1 pack of coarse filter wool for aquarium filters
from 7,97 €
More View product
JBL Symec VL
Filter wool fleece for aquarium filters to remove of all types of water cloudiness
  • Fast removal of all types of cloudiness in freshwater and marine aquariums: quality filter wool fleece for aquarium filters
  • Easy to use: individual cut of the 3 cm thick fleece mat. Inlay as last filter stage
  • Crystal-clear water: filters off all types of cloudiness and particles. Although rinsing is possible we recommend exchanging it instead
  • No release of pollutants - water-neutral synthetic fibre
  • Contents: 1 pack of filter wool fleece for aquarium filters
from 9,35 €
More View product

A word about cookies before we continue

The JBL Homepage also uses several types of cookies to provide you with full functionality and many services: We require technical and functional cookies to ensure that everything works when you visit this website. We also use cookies for marketing purposes. This ensures that we recognise you when you visit our extensive site again, that we can measure the success of our campaigns and that the personalisation cookies allow us to address you individually and directly, adapted to your needs - even outside our website. You can determine at any time - even at a later date - which cookies you allow and which you do not allow (more on this under "Change settings").

The JBL website uses several types of cookies to provide you with full functionality and many services: Technical and functional cookies are absolutely necessary so that everything works when you visit this website. In addition, we use cookies for marketing purposes. You can determine at any time - even at a later date - which cookies you allow and which you do not (more on this under "Change settings").

Our data protection declaration tells you how we process personal data and what purposes we use the data processing for. tells you how we process personal data and what purposes we use the data processing for. Please confirm the use of all cookies by clicking "Accept" - and you're on your way.

Are you over 16 years old? Then confirm the use of all cookies with "Noticed" and you are ready to go.

Choose your cookie settings

Technical and functional cookies, so that everything works when you visit our website.
Marketing cookies, so that we recognize you on our pages and can measure the success of our campaigns.
I accept the YouTube Terms of Service and confirm that I have read and understood the YouTube Terms of Service .

PUSH messages from JBL

What are PUSH messages? As part of the W3C standard, web notifications define an API for end-user notifications that are sent to the user's desktop and/or mobile devices via the browser. Notifications appear on the end devices as they are familiar to the end user from apps installed on the device (e.g. emails). Notifications appear on the end user’s device, just like an app (e.g. for emails) installed on the device.

These notifications enable a website operator to contact its users whenever they have a browser open - it doesn’t matter whether the user is currently visiting the website or not.

To be able to send web push notifications, all you need is a website with a web push code installed. This allows brands without apps to take advantage of many of the benefits of push notifications (personalised real-time communications at just the right moment).

Web notifications are part of the W3C standard and define an API for end user notifications. A notification makes it possible to inform the user about an event, such as a new blog post, outside the context of a website.

JBL GmbH & Co. KG provides this service free of charge, and it is easy to activate or deactivate.